Short Pulse Lasers
Discover our short pulsed lasers from the BX, IS, and GX series.
BX Series
The BX series consists of electro-optically Q-switched InnoSlab lasers with low to medium power and pulse energy.
- Beam quality: M² < 1.2
- Pulse energy: up to 7 mJ
- Pulse width typ.: 6 ns
- Peak power: up to 1.2 MW
- Pulse repetition rate: up to 100 kHz
- Average power: up to 80 W
- Wave length: 1064, 532 nm
IS Series
The IS series consists of electro-optically Q-switched InnoSlab lasers with medium to high power and pulse energy.
- Beam quality: M² < 1.2
- Pulsenergie: bis zu 60 mJ
- Pulse width typ.: 6 ns
- Peak power: up to 10 MW
- Pulse repetition rate: up to 100 kHz
- Average power: up to 400 W
- Wave length: 1064, 532, 355, 266 nm
GX Series
The GX series consists of electro-optically Q-switched InnoSlab lasers with high power and high pulse energy.
- Beam quality: M² <= 1.2
- Pulse energy: up to 120 mJ
- Pulse width typ.: 6 ns
- Peak power: up to 20 MW
- Pulse repetition rate: up to 100 kHz
- Average power: up to 800 W
- Wave length: 1064, 532, 355, 266 nm
Short Pulse Lasers
Compact and versatile
The short-pulsed lasers of our standard series include electro-optically Q-switched solid-state lasers with various laser media, pulse energies, output powers, and a selection of wave lengths.
- Beam quality: M² < 1.2
- Pulse energy: up to 120 mJ
- Pulse length: 800 ps – cw
- Peak power: up to 20 MW
- Pulse repetition rate: up to 200 kHz
- Average power: up to 800 W
- Wave length: IR, VIS, DUV
- AI-ready
Applications
BX-Series
Lasers from the BX series can be used in a variety of applications. For example, in the following areas:
- Photovoltaics, such as scribing, drilling, cutting silicon wafers, ablation of conductive or non-conductive layers, thin-film processing, solar cells, and crystalline silicon solar cells
- Displays, such as structuring the conductive layer and cutting glass
- Glass industry, such as micro-drilling and high-productivity material removal
- Electronics industry, such as drilling and cutting circuit boards
- Toolmaking and mechanical engineering, such as rapid 3D pattern development through ablation
IS-Series
Lasers from the IS series can be used in a variety of applications. For example, in the following areas:
- Photovoltaics, such as scribing, drilling, cutting silicon wafers, ablation of conductive or non-conductive layers, thin-film processing, solar cells, and crystalline silicon solar cells
- Displays, such as structuring the conductive layer, sequential lateral crystallization of silicon, drilling, and cutting glass screens
- Electronics industry, such as drilling and cutting circuit boards
- Automotive industry, such as manufacturing of fuel injectors
- Toolmaking and mechanical engineering, such as rapid 3D pattern development through ablation
- Science, such as pumping dye lasers, pumping OPO and Ti:Sapphire lasers, particle imaging for velocity measurement (PIV)
GX-Series
Lasers from the GX series can be used in a variety of applications. For example, in the following areas:
- Laser lift off (LLO)
- Photovoltaics, such as ablation of conductive or non-conductive layers from thin-film solar cells and crystalline silicon solar cells
- Displays, such as structuring conductive layers, sequential lateral crystallization of Si
- Science, such as pumping dye lasers, pumping OPO and Ti:Sapphire lasers, particle imaging for velocity measurement